Brushing semi-transparent stain into wood boards

Deck staining for lake homes and backyards around Lake Wales

Deck Staining and Painting in Lake Wales, FL

Florida sun, afternoon storms and a shady screened porch are the three things that wreck a deck finish. One Source 360 cleans, dries and coats decks, docks and pergolas with stains and paints chosen for exactly those conditions.

10% off all jobs over $2,500

$100 referral rewardPaid when the referred job is finished.

* Written into your quote before work starts. See terms.

  • Available 24/7(863) 270-7736
  • Service area50 miles around Lake Wales
  • Every jobWorkmanship guarantee
  • CoverageLicensed and insured

Stain or paint? It depends on the deck

People search for deck staining and deck painting as if they were two choices, but on a Florida deck the real options are three:

  • Semi-transparent stain. Soaks into the wood, shows the grain, and wears away gradually instead of peeling. Easiest to maintain and the best choice for most pressure-treated pine decks in decent shape.
  • Solid stain. Opaque like paint but still penetrates and breathes. Hides gray, weathered boards and mismatched repairs. A good middle ground for older decks you want to keep.
  • Deck paint or porch and floor enamel. A film on top of the wood. Gives the most color choice and the smoothest look, but on a humid, sun-baked deck a film can trap moisture and peel. We recommend it mainly for covered porches, railings, lattice and pergola posts, or decks that are already painted and in sound shape.

Luis looks at the wood, the exposure, how the deck is used and what is on it now, then recommends the finish that will last the longest for the least maintenance. If you want to think it through first, read our guide to painting versus staining a deck in Florida.

Pressure washing a wooden deck structure before staining

The prep that decides how long it lasts

  • Clean. A deck cleaner lifts dirt, old finish residue and the mildew that grows on any shaded or screened Florida deck. Then a careful pressure wash, low enough not to fur the wood.
  • Brighten. A wood brightener neutralizes the cleaner and restores the color of gray, UV-weathered pine so the stain goes on even.
  • Repair and sand. Popped nails and screws are set, split or rotten boards replaced, rough spots and raised grain sanded. Sprinkler rust and tannin stains are treated.
  • Dry completely. This is the step that gets skipped. Pressure-treated wood and a freshly washed deck hold a lot of water, and stain applied to damp wood blotches, stays tacky or fails early. We check moisture, not just the calendar.
  • Apply and back-brush. Stain is applied board by board and back-brushed so it soaks in evenly, with railings, posts and lattice done in the right order to avoid drips. Paint systems get a primer first.
Wet wooden deck boards during washing

Decks, docks, lanais and pergolas in Central Florida

With dozens of lakes between Lake Wales, Winter Haven and Lakeland, a lot of the wood we coat is on docks and boathouses, which take sun from above and reflected off the water, plus constant humidity. Penetrating stains with strong UV and mildew resistance do best there, and we plan the work for the dry window between morning dew and the afternoon storm so the finish sets before it gets wet.

Screened lanais and covered porches are the opposite problem: shade, little airflow and mildew. There we lean on mildew-resistant products and a cleaning routine that keeps the finish ahead of the growth. Pergolas, arbors, fences, stairs and railings all get the same prep-first approach, and freshly built pressure-treated structures wait until the wood has dried out enough to take a finish.

Timing a deck project here

The dry season, roughly late fall through spring, is the easiest time to stain a deck. Summer works too, with a schedule built around the storms and a product that cures fast enough for the window. We watch the forecast, start early, and never coat a deck that is going to be rained on before it sets. Most decks take a few days from cleaning to final coat, mostly drying time. The written quote spells it out. Painted railings and trim on the house itself are covered under exterior painting.

Free walkthrough

Want a straight answer about your deck staining project? Luis will walk it with you and put the price in writing.

Service Made Simple.

How a deck staining job goes

  1. Call, text, or send the form

    Luis answers the phone himself. Tell him what you need and he will set up a time to come out.

  2. Free walkthrough and written quote

    He looks at every surface, talks through prep, products and colors, and puts the whole scope in writing.

  3. Prep and paint, done right

    Pressure wash, repairs, caulk, prime where needed, then two coats. Your home is protected and the site is cleaned up daily.

  4. Final walk and workmanship guarantee

    You walk the job with Luis before it is called done. The work is backed by a workmanship guarantee.

Photos

Recent work

Covered porch with a stained wood deck floor and bench
Applying stain to weathered wood
Painting white porch railings and posts
Brushing semi-transparent stain into wood boards
Pressure washing a wooden deck structure before staining
Wet wooden deck boards during washing
Covered porch with a stained wood deck floor and bench
Applying stain to weathered wood
Painting white porch railings and posts
Brushing semi-transparent stain into wood boards

FAQ

Deck Staining questions

Should I stain or paint my deck?

For most Florida decks, stain. Semi-transparent stain soaks in and wears gradually; solid stain hides weathered wood but still breathes. Paint forms a film that can trap moisture and peel in our humidity, so we recommend it mainly for covered porches, railings and decks that are already painted.

How soon can a new pressure-treated deck be stained?

When the wood has dried out enough to accept finish, which depends on how wet the lumber was and the weather. We test whether water soaks in or beads up and check moisture before scheduling, rather than guessing a number of weeks.

Do you clean the deck first?

Always. Cleaner, a careful pressure wash and a brightener, then full drying time. Skipping the prep is the main reason deck finishes fail early.

Can you stain a dock or a boathouse?

Yes. Docks are common work for us around the lakes. We use stains with strong UV and mildew resistance and schedule around the weather so the finish sets before rain.

How long does deck staining take?

Usually a few days: a day to clean and repair, a day or more to dry, and a day to stain, with a second coat where the product calls for it. Weather can stretch it, and we build that into the schedule.

Service area

Deck Staining within 50 miles of Lake Wales

Every town inside the circle gets the same prep, the same products and the same written quote, from Lake Wales out to Lakeland, Kissimmee, Sebring and Orlando. If your town is not listed, call anyway.

City pages

One Source 360 service area map A 50-mile circle centered on Lake Wales, FL that includes Lake Wales, Lakeland, Davenport, Winter Haven, Kissimmee, Clermont, Sebring and Orlando. 10 mi25 mi50 mi N LakelandDavenportWinter HavenKissimmeeClermontSebringOrlando Lake Wales
Every city page, plotted. Gray dots are other towns we serve inside the circle.

Free quote

Get a free deck staining quote

Send a few details and Luis will call you within one business day to set up a free walkthrough and written quote. No pressure, no hard sell.

  1. Luis calls you backWithin one business day of your request.
  2. Free walkthroughAt the property, at a time that suits you.
  3. Written quoteEvery surface, product and coat, on paper.

10% off all jobs over $2,500Mention it when Luis calls.

$100 referral rewardPaid when the referred job is finished.

  • Licensed and insured
  • Workmanship guarantee
  • Available 24/7
  • Serving 50 miles around Lake Wales

Open 24 hours, 7 days a week. Lake Wales, FL and everywhere within 50 miles.

You are asking about 10% off all jobs over $2,500. Mention it when Luis calls so it is written into your quote. Referred by a friend? Give their name too, so they get their $100 when your job is finished.

10% off all jobs over $2,500

Call nowGet a Free Quote