Lap-sided home with fresh gray paint and white trim

Siding painters for frame, manufactured and mixed-exterior homes

Siding Painting in Lake Wales, FL

Not every house around here is block and stucco. Frame homes, gables, additions, manufactured homes and newer builds with fiber cement all have siding, and each type needs its own prep and paint. One Source 360 knows the difference.

10% off all jobs over $2,500

$100 referral rewardPaid when the referred job is finished.

* Written into your quote before work starts. See terms.

  • Available 24/7(863) 270-7736
  • Service area50 miles around Lake Wales
  • Every jobWorkmanship guarantee
  • CoverageLicensed and insured

Siding types we paint, and what each one needs

  • Fiber cement (Hardie-type) siding. Common on homes and townhomes built here in the last couple of decades. Holds paint very well. Needs washing, re-caulking of butt joints and trim, spot-priming of any bare or chalky areas, and two coats of 100% acrylic.
  • Vinyl siding. Yes, it can be painted, with a vinyl-safe acrylic in a color no darker than the original (or a specially formulated heat-reflective darker shade), because dark paint on vinyl can make it warp in Florida sun. Thorough cleaning is the whole prep.
  • Aluminum siding. Chalks heavily with age. Washed, chalk bound with the right primer, then acrylic topcoats. Dents and loose panels are addressed first.
  • Wood siding and T1-11. On older frame homes and outbuildings. Scraped, sanded, rotted sections replaced, primed and painted. The most prep-heavy and the most rewarding.
  • Soffits and fascia. Wood or aluminum, and the most weather-exposed trim on any house. Rotted fascia is replaced before paint, not painted over.

Many homes mix materials: stucco walls with siding gables, or a block house with a frame addition. We paint the whole exterior as one job with the right product on each surface; see exterior painting for the full scope and stucco painting for the block walls.

Brushing primer onto exterior trim

Prep for siding in Central Florida

Siding fails at the seams and at the bottom. Joints and trim lines open up as boards move with heat and humidity, and the lowest courses take sprinkler spray, splash-back and mildew. So we wash everything with a mildew treatment, scrape and sand failing paint, replace soft wood, caulk every open joint, prime bare and chalky spots, and only then paint. Two coats, sprayed and back-rolled or brushed and rolled depending on the surface and the neighbors.

The weather plan is the same as any exterior here: mornings and early afternoons in storm season, dry wood before paint, and a close eye on the radar. UV is the other constant. South and west elevations fade first, which is one reason we steer vinyl and fiber cement toward colors and products that hold up on those walls.

New fascia board and gutter installed before paint

Repaint or replace the siding?

If the siding is sound and only the finish has failed (fading, chalking, peeling, mildew), repainting restores it at a fraction of replacement cost. If boards are rotted through, warped, cracked across wide areas or pulling away from the wall, replacement of those sections comes first. Most homes land in between: a handful of boards replaced, then a full repaint. Luis will tell you which boards are a problem during the walkthrough and include the repair in the written quote so nothing is a surprise.

HOA approvals, manufactured homes and outbuildings

Siding color changes usually need the same architectural approval as any exterior repaint in communities with an HOA, and we provide the samples and product information for your submission. Manufactured and modular homes with vinyl or aluminum siding are regular work for us, as are sheds, barns, workshops and detached garages. If it has siding and it is within 50 miles of Lake Wales, we paint it.

Free walkthrough

Want a straight answer about your siding painting project? Luis will walk it with you and put the price in writing.

Service Made Simple.

How a siding painting job goes

  1. Call, text, or send the form

    Luis answers the phone himself. Tell him what you need and he will set up a time to come out.

  2. Free walkthrough and written quote

    He looks at every surface, talks through prep, products and colors, and puts the whole scope in writing.

  3. Prep and paint, done right

    Pressure wash, repairs, caulk, prime where needed, then two coats. Your home is protected and the site is cleaned up daily.

  4. Final walk and workmanship guarantee

    You walk the job with Luis before it is called done. The work is backed by a workmanship guarantee.

Photos

Recent work

Washing lap siding before painting
Home with stucco walls and siding gables in coordinated colors
Green-painted wood siding with white window trim
Lap-sided home with fresh gray paint and white trim
Brushing primer onto exterior trim
New fascia board and gutter installed before paint
Washing lap siding before painting
Home with stucco walls and siding gables in coordinated colors
Green-painted wood siding with white window trim
Lap-sided home with fresh gray paint and white trim

FAQ

Siding Painting questions

Can vinyl siding be painted?

Yes, with a vinyl-safe 100% acrylic paint in a color no darker than the original, or a heat-reflective formula if you want a darker shade. Dark regular paint can cause vinyl to warp in Florida sun. Cleaning is the main prep.

Do you paint fiber cement siding?

Yes. Fiber cement takes paint very well. We wash it, re-caulk the joints, prime any bare or chalky spots and apply two coats of acrylic exterior paint.

Will you replace rotted boards?

Yes. Rotted fascia, soffit and siding boards are replaced and primed before painting. The written quote lists which boards and why.

How long does siding paint last in Florida?

It depends on the material, the color, sun exposure and the prep. Properly prepped fiber cement and primed wood hold paint well; chalky aluminum and unprepped surfaces do not. We will give you an honest read on your house rather than a generic number.

Do you paint soffits and fascia at the same time?

Yes. Soffits and fascia are included in a siding or exterior repaint and are usually where the most prep and repair happens.

Service area

Siding Painting within 50 miles of Lake Wales

Every town inside the circle gets the same prep, the same products and the same written quote, from Lake Wales out to Lakeland, Kissimmee, Sebring and Orlando. If your town is not listed, call anyway.

City pages

One Source 360 service area map A 50-mile circle centered on Lake Wales, FL that includes Lake Wales, Lakeland, Davenport, Winter Haven, Kissimmee, Clermont, Sebring and Orlando. 10 mi25 mi50 mi N LakelandDavenportWinter HavenKissimmeeClermontSebringOrlando Lake Wales
Every city page, plotted. Gray dots are other towns we serve inside the circle.

Free quote

Get a free siding painting quote

Send a few details and Luis will call you within one business day to set up a free walkthrough and written quote. No pressure, no hard sell.

  1. Luis calls you backWithin one business day of your request.
  2. Free walkthroughAt the property, at a time that suits you.
  3. Written quoteEvery surface, product and coat, on paper.

10% off all jobs over $2,500Mention it when Luis calls.

$100 referral rewardPaid when the referred job is finished.

  • Licensed and insured
  • Workmanship guarantee
  • Available 24/7
  • Serving 50 miles around Lake Wales

Open 24 hours, 7 days a week. Lake Wales, FL and everywhere within 50 miles.

You are asking about 10% off all jobs over $2,500. Mention it when Luis calls so it is written into your quote. Referred by a friend? Give their name too, so they get their $100 when your job is finished.

10% off all jobs over $2,500

Call nowGet a Free Quote